Leveling aid Front
Leveling-aid Right
Leveling-aid_left

Feynlab® Leveling Aid

$59.39From

This leveling agent helps remove high spots and imperfections from ceramic coatings during application. The formula works with all coating brands to create smooth, even surfaces. Simply apply where needed to make coating removal easier and achieve professional results.

Also called: coating leveler · high spot remover · smoothing solution · ceramic leveling fluid

Makes coating application stress-free for both new and experienced users. Creates smooth finishes without the need for polishing or wet sanding when high spots occur.

  • Removes coating high spots with ease
  • Works with all ceramic coating brands
  • No polishing or wet sanding required
  • Creates smooth, even coating surfaces
  • Makes application process more forgiving
  • Leaves behind nano particles for added protection
  • Made in USA
$59.39
In Stock
SKU: N/A Categories: , , ,

Description

FEYNLAB® LEVELING AID assists in the final wiping process (leveling) of more complicated coating installations; such as Ceramic Plus and Heal Lite. Different protection aspects of coatings in the FEYNLAB™ family require more in-depth procedures. LEVELING AID is the final step, allowing for optimal film build and adhesion to painted surfaces. It’s main purpose is to reinforce bonding as the final step, leaving the surface with a clear appearance.

LEVELING AID also works well in the removal of other coating technology outside of the FEYNLAB chemistry family.

Product Benefits:

FEYNLAB® LEVELING AID, promotes adhesion, film build, and is the final step to wiping the surface clear for FEYNLAB® coatings such as Ceramic Plus and Heal Lite.

FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.

Included:

120ml Bottle FEYNLAB® LEVELING AID

Cautions:

Always wear respirator & gloves during application. Ensure application area is free of loose contamination.

Paint Preparation:

Thoroughly clean vehicle using FEYNLAB® PURE WASH. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME. If necessary, use a ferrous iron removal product to remove all embedded iron deposits. After polishing paint to desired level, remove all polish oils using FEYNLAB® PANEL PREP to ensure optimal bonding and durability of the coating.

Leveling AID Application Directions:

LEVELING AID is used to assist in the removal of specific FEYNLAB® coatings, once coatings have been applied and cured about 75%.

Using a new microfiber applicator, apply a LIBERAL amount of LEVELING AID to the panel. The amount of product should be enough to evenly coat the area without over saturation (dripping).

Once LEVELING AID is evenly applied to the entire panel(s), its time for removal.

To remove, follow the same pattern of application, using two clean MF towels. Towel A (left hand) will remove the majority of coating residue. Towel B (right hand) will remove any remaining residue, revealing a crystal-clear surface. With minimal pressure, gently wipe the surface to a clear finish. Minimal effort should be required– it should feel as effortless as drying a vehicle.

ALWAYS keep cap on bottle when not in use.

Recommended Maximum Area of Application:

HALF of a door or 1/4 of a hood, then wipe off in same pattern as application.

Final Inspection:

Carefully inspect all finished panels for leftover coating residue (high spots) before moving on to the rest of the car. Commonly edges, emblems and tight spaces tend to hold remaining product. High spots are much easier to remove if you catch within a 20-40 min window after final wipe than later on.

Post Application Instructions

  • Avoid any incidental water exposure for 24 hours.
  • Avoid all chemicals including car washes for 7 days.
  • Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS and FEYNLAB® DETAILER

Climate Notes

All FEYNLAB® Coatings are subject to different dwell and curing time windows due to humidity and temperature. In General, the higher the humidity level the quicker the coating will cure. If humidity level approaches 75% or higher then consider lessening the recommended dwell and wipe times for the coating.

If possible apply coating in temperature controlled environment 10°C-30°C (50°F-85°F), with humidity as low as possible.

Frequently Asked Questions

Additional information

Weight N/A
Dimensions N/A
Quantity

,

13 reviews for Feynlab® Leveling Aid

  1. (No)

    Steve Paski –

    This product is simply amazing to use. Made leveling Ceramic Plus a breeze and created a perfect surface with the minimum of effort. Very impressed

  2. (No)

    Steve Paski –

    This product is simply amazing to use. Made leveling Ceramic Plus a breeze and created a perfect surface with the minimum of effort. Very impressed

  3. (No)

    bradcrane (verified owner) –

    Feynlab Leveling Aid is the schizzel.
    Pro: I can’t believe how easy it makes the leveling process.
    I have used it with other coating that typically come off like maple syrup and it was a breeze. Great product!
    Con: You need to wear a respirator as it has a pretty strong odor.

  4. (No)

    bradcrane –

    Feynlab Leveling Aid is the schizzel.
    Pro: I can’t believe how easy it makes the leveling process.
    I have used it with other coating that typically come off like maple syrup and it was a breeze. Great product!
    Con: You need to wear a respirator as it has a pretty strong odor.

  5. (No)

    Nickc805 (verified owner) –

    Leveling aid makes installing self healing coating fun! The clarity and gloss it reveals is so crisp!

  6. (No)

    Nickc805 (verified owner) –

    Leveling aid makes installing self healing coating fun! The clarity and gloss it reveals is so crisp!

  7. (No)

    Toxix Detailing, Elton Fernandez –

    This product does exactly what its mean to do. Aid with leveling and removal of coatings.

    Super easy to use, I’ve noticed that Feynlab has adjusted the dispensing method of this. Moving from a sprayer to a dropper which I find better.

    From personal experience, we just use the microfiber applicator rather than the towel.

    Seems to add an additional layer of slickness as well!

  8. (No)

    Toxix Detailing, Elton Fernandez –

    This product does exactly what its mean to do. Aid with leveling and removal of coatings.

    Super easy to use, I’ve noticed that Feynlab has adjusted the dispensing method of this. Moving from a sprayer to a dropper which I find better.

    From personal experience, we just use the microfiber applicator rather than the towel.

    Seems to add an additional layer of slickness as well!

  9. (No)

    Sam Spirer (verified owner) –

    The sorcery that was used to create this product is beyond my understanding. This stuff is brilliant and makes installing every coating on the menu incredibly easy. Wait until it starts sweating and watch how easy your coating wipes off. I have tested with other brands to which is works decent but pairs with every feynlab product amazingly. A must have if you are an installer.

  10. (No)

    Sam Spirer (verified owner) –

    The sorcery that was used to create this product is beyond my understanding. This stuff is brilliant and makes installing every coating on the menu incredibly easy. Wait until it starts sweating and watch how easy your coating wipes off. I have tested with other brands to which is works decent but pairs with every feynlab product amazingly. A must have if you are an installer.

  11. (No)

    Paul Fugiero (verified owner) –

    This Leveling Aid makes it SO MUCH easier to remove coating. Of course everyone should be using Feynlab coatings but if you’re not and use this, it will make life easier. Promise. The fact that it leaves nano particles behind itself is amazing enough.

  12. (No)

    Paul Fugiero (verified owner) –

    This Leveling Aid makes it SO MUCH easier to remove coating. Of course everyone should be using Feynlab coatings but if you’re not and use this, it will make life easier. Promise. The fact that it leaves nano particles behind itself is amazing enough.

  13. (No)

    Fine Shine Detailing –

    Great product to aid in leveling when needed.

  14. (No)

    Fine Shine Detailing –

    Great product to aid in leveling when needed.

  15. (No)

    Cleanup (verified owner) –

    Revolutionary product Feynlab created a much needed product that wasn’t available before!

  16. (No)

    Cleanup –

    Revolutionary product Feynlab created a much needed product that wasn’t available before!

  17. (No)

    Kate Hadland (verified owner) –

    Love this product! Huge help with removing coatings and a little goes a long way!

  18. (No)

    Kate Hadland –

    Love this product! Huge help with removing coatings and a little goes a long way!

  19. (No)

    Bareknuckles –

    I wish all coating companies had a product like this. Leveling aid makes the Heal coatings a breeze and even better if you happen to miss a high spot it allows you to remove it without the need of busting out a polished or wet sanding

  20. (No)

    Bareknuckles (verified owner) –

    I wish all coating companies had a product like this. Leveling aid makes the Heal coatings a breeze and even better if you happen to miss a high spot it allows you to remove it without the need of busting out a polished or wet sanding

  21. (No)

    relentlessshine (verified owner) –

    Cant live without this. A must have for leveling the Healing Coatings.

  22. (No)

    relentlessshine (verified owner) –

    Cant live without this. A must have for leveling the Healing Coatings.

  23. (No)

    Nick CD Marsh –

    This is one of those products you never think you need. But once you buy and use, can never live without!

  24. (No)

    Nick CD Marsh –

    This is one of those products you never think you need. But once you buy and use, can never live without!

  25. (No)

    Corey L Eberhardt (verified owner) –

    Definitely makes leveling a breeze on Ceramic Plus and Self Heal Lite. A must use!!

  26. (No)

    Corey L Eberhardt (verified owner) –

    Definitely makes leveling a breeze on Ceramic Plus and Self Heal Lite. A must use!!

Only logged in customers who have purchased this product may leave a review.

PRODUCT DESCRIPTION

FEYNLAB® LEVELING AID assists in the final wiping process (leveling) of more complicated coating installations, such as Ceramic Plus and Heal Lite. Different protection aspects of coatings in the FEYNLAB™ family require more in-depth procedures. LEVELING AID is the final step, allowing for optimal film build and adhesion to painted surfaces. Its main purpose is to reinforce bonding as the final step, leaving the surface with a clear appearance. LEVELING AID also works well in the removal of other coating technology outside of the FEYNLAB® chemistry family. FEYNLAB® true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.



APPROVED SURFACES
APPROVED SURFACES FOR APPLICATION – DO NOT apply to unapproved surfaces*
  • Clear coated painted surfaces (see warranty terms and conditions for approved manufacturers & vehicle types)

*The use of Feynlab products on any surface not explicitly listed in the instructions booklet is done at the user's own risk. If damage occurs to the surface as a result of using the product on an unlisted surface, we will not be held liable for any such damage.



INCLUDED
120ml (4oz) Bottle


CAUTIONS
Always wear respirator & gloves during application. Ensure application area is free of loose contamination.


PREPPING THE PAINT

Thoroughly clean vehicle using FEYNLAB® PURE WASH. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME. If necessary, use a ferrous iron removal product to remove all embedded iron deposits. After polishing paint to desired level, remove all polish oils using FEYNLAB® PANEL PREP to ensure optimal bonding and durability of the coating.



DIRECTIONS

Prior to application, place the vehicle in a well-lit, temperature-controlled 50°F-85°F (10°C-30°C), contamination free environment. Have plenty of new microfiber towels (4 or more), and 2 - 3 microfiber applicators on hand before application.



APPLICATION INSTRUCTIONS
  • LEVELING AID is used to assist in the removal of specific FEYNLAB® coatings, once coatings have been applied and cured about 75%.
  • Using a new microfiber applicator, apply a liberal amount of LEVELING AID to the panel. The amount of product should be enough to evenly coat the area without over saturation (dripping).
  • Once LEVELING AID is evenly applied to the entire panel(s), it’s time for removal.
  • To remove, follow the same pattern of application, using two clean Microfiber towels. Towel A (left hand) will remove the majority of coating residue. Towel B (right hand) will remove any remaining residue, revealing a crystal-clear surface. With minimal pressure, gently wipe the surface to a clear finish. Minimal effort should be required– it should feel as effortless as drying a vehicle.
  • Always keep the cap on bottle when not in use.


RECOMMENDED MAXIMUM AREA OF APPLICATION

Half of a door or 1/4 of a hood, then wipe off in same pattern as application.



INSPECT

Carefully inspect all finished panels for leftover coating residue (high spots) before moving on to the rest of the car. Commonly edges, emblems and tight spaces tend to hold remaining product. High spots are much easier to remove if you catch them within a 20-40 minute window after final wipe than later on.



POST APPLICATION INSTRUCTIONS
  • Avoid any incidental water exposure for 24 hours.
  • Avoid all chemicals including car washes for 7 days.
  • Wash & Maintain using FEYNLAB® Pure Wash or FEYNLAB® Pure Rinseless and FEYNLAB® Detailer.

Related products

  • Wheel-and-Caliper-black

    Feynlab® Ceramic Wheel & Caliper

    (No)
    Price range: $48.82 through $1,464.68
    Select options This product has multiple variants. The options may be chosen on the product page
  • Heal_Plus_All

    Feynlab® Self Heal Plus

    (No)
    $360.30
    Add to cart
  • Matte-Ceramic front

    Feynlab® Matte Ceramic Coating

    (No)
    Price range: $103.89 through $1,870.06
    Select options This product has multiple variants. The options may be chosen on the product page
  • Ceramic Primer 120ml black

    Feynlab® Ceramic Primer

    (No)
    Price range: $92.34 through $1,108.11
    Select options This product has multiple variants. The options may be chosen on the product page